Command and Control
Mitsubishi offers a complete line of control room display wall systems for your mission critical command, control and tactical operation center. Our control room display wall systems have been engineered for extremely high reliability and automatic self calibration. This also makes them ideal for installation into highly secured command, control and tactical operation centres with minimal to no support required from outside personnel. To ensure that our control room display wall automatically calibrates itself, we implemented Digital Colour Space Control ™, Dynamic Brightness Balancing™ and Smart Lamp™/Smart Colorwheel™ together with a host of other innovative technologies.
Mitsubishi’s original, industry proven Digital Colour Space Control with digital colour balancing and blending circuits, compensates for colour and brightness discrepancies among the display wall cubes. This unique feature employs built-in sensors to measure each cube’s primary colour levels every 2 seconds and automatically make the necessary adjustments to ensure consistent colour and brightness uniformity across the entire display wall, saving the customer time and money associated with on-going colour balancing maintenance costs.
In our lamp-based display wall systems, our Smart Lamp and Smart Color wheel technologies utilize a memory chip on each component that stores the factory-measured color specifications of each lamp and color wheel cartridge. Once new cartridges are inserted into the system, the color measurement is automatically downloaded into the electronics chassis and calibrated to match the rest of the Display Wall cubes.
Image quality has always been one of our largest priorities, which is why we offer among the highest screen brightness and contrast ratios available. Thanks to this high brightness, your command and control or tactical operation center can have a variety of ambient lighting conditions from low light to high office lighting conditions without any perceivable difference in display quality.
For a command center or tactical operation center with limited space, we offer a series of front access control room display walls. Each front access unit is 100% serviceable from the front and is fully enclosed from the rear with built-in ventilation ducts and cable channels enabling the Display Wall to be pushed flush back against a wall.
Depending on the size and resolution requirements of your command center or tactical operation center, Mitsubishi has a control room display wall solution that can suit your needs.
Benefits for this environmentReliability
The best protection from downtime is not through redundancy, but through reliability. Mitsubishi Display Wall cubes will prove to be highly reliable components of your control room system.
High Brightness and Contrast Ratio
Mitsubishi’s high brightness and contrast ratios provide images that are clear, sharp and easy to read thus reducing eye strain and fatigue for the operators.
Automatic Intensity Management
The most common cause of color differences between adjacent screens is brightness intensity differences. Mitsubishi’s Dynamic Brightness Balancing circuitry checks and matches adjacent cubes every 2 seconds to ensure proper intensity matching.
Automatic Color Space Management
Mitsubishi utilizes a sophisticated color space management circuit that allows fine tuning of color space to meet stringent color settings. Because the system can be set to user defined target color spaces, the system can automatically adjust color space to compensate for newly introduced optical components.
Dual Redundant Lamps & LED Light Source Options
Redundant lamps offer the ability to minimize downtime due to lamp failures. Lamps change within 15 seconds, which includes automatic adjustment of color space and brightness intensity. Also available is an LED light source which eliminates the requirement to replace lamps.
Mitsubishi’s Display Wall cubes have a depth of as little as a mere 21”. Our front access models allow the displays to be mounted directly against the wall with zero clearance. For smaller sites, our LCD panels can be wall–mounted.
Mitsubishi Electric Sales Canada can assist you with choosing the most appropriate display wall solution to meet your specific application requirements and budget. Please contact us for more details.